Skip to content
Fault code dictionary (DTC)

P0A97 — Battery cooling fan 2: poor performance or stuck off

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit commands battery cooling fan 2, but the fan does not turn or does not reach the requested speed. The electrical circuit may be fine: the problem is that the fan does not produce the expected airflow. With a battery that does not cool well, the system may reduce power.
FamilyPowertrain (P)

Typical symptoms

Hybrid system warning light on
Battery fan silent when it should be working
Fan turning slowly or making abnormal noise
Reduced power with a hot battery
Battery temperature rising more than normal
Slowed charging

Common causes

Battery air duct or filter clogged with dust or dirt
Fan with worn bearings or impeller jammed by foreign objects
Weakened fan motor
Low supply voltage at the fan
Connector with a poor contact
A problem in the fan control

What to do

First check that the battery air intake and filter, if fitted, are clean and clear. If the fan stays still or is noisy, have the system checked at a workshop without waiting too long. In the meantime avoid heavy loads and driving in intense heat.

How to read code P0A97

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0A97 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (97) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0A97 mean?

Battery cooling fan 2: poor performance or stuck off. The control unit commands battery cooling fan 2, but the fan does not turn or does not reach the requested speed. The electrical circuit may be fine: the problem is that the fan does not produce the expected airflow. With a battery that does not cool well, the system may reduce power.

Can I keep driving with code P0A97 active?

With caution: limp mode possible, have it checked soon

Common causes — P0A97

Battery air duct or filter clogged with dust or dirt Fan with worn bearings or impeller jammed by foreign objects Weakened fan motor Low supply voltage at the fan Connector with a poor contact A problem in the fan control

How do you fix code P0A97?

First check that the battery air intake and filter, if fitted, are clean and clear. If the fan stays still or is noisy, have the system checked at a workshop without waiting too long. In the meantime avoid heavy loads and driving in intense heat.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes