P0A99 — Battery cooling fan 2: control circuit low
| Meaning | The control unit has measured a lower voltage than expected on the control circuit of battery cooling fan 2. This usually means a short to ground or a missing supply. The fan may not start when it is needed. |
| Family | Powertrain (P) |
Typical symptoms
Battery fan not starting
Reduced power with a hot battery
Slower charging
High battery temperature message
Fan working intermittently
Common causes
Damp or corroded fan connector
Fan motor shorted internally
Missing fuse or supply to the fan
A fault in the module driving the fan
Wiring crushed or damaged under the seat or in the battery compartment
What to do
How to read code P0A99
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0A99 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (99) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0A99 mean?
Battery cooling fan 2: control circuit low. The control unit has measured a lower voltage than expected on the control circuit of battery cooling fan 2. This usually means a short to ground or a missing supply. The fan may not start when it is needed.
Can I keep driving with code P0A99 active?
With caution: limp mode possible, have it checked soon
Common causes — P0A99
Control wire touching ground because of damaged insulation Damp or corroded fan connector Fan motor shorted internally Missing fuse or supply to the fan A fault in the module driving the fan Wiring crushed or damaged under the seat or in the battery compartment
How do you fix code P0A99?
Have the fan's wiring and connectors checked, especially where cables pass close to sheet metal or may have been crushed. Avoid heavy loads and very hot days until the fan has been checked. The fault should be fixed without delaying too much, because a battery that overheats gets damaged.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0A98 — Battery cooling fan 2 stuck on
- Next code: P0A9A — Battery cooling fan 2: control circuit high
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem