Skip to content
Fault code dictionary (DTC)

P0ACA — Hybrid/EV battery temperature sensor C circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected a problem in the circuit of temperature sensor C of the high-voltage battery pack. The code points to a general circuit fault and does not say whether the signal is low, high or unstable. Without this reading, the thermal management of the battery is less precise and the system may limit power.
FamilyPowertrain (P)

Typical symptoms

Hybrid system or engine warning light on
Reduced power or limp mode
Battery cooling fan constantly loud or not running
Slowed or interrupted charging
Hybrid/EV system fault message

Common causes

Damaged or corroded temperature sensor connector or wiring
Faulty temperature sensor C
Fault in the battery management control unit
Moisture or corrosion in the battery assembly
Fault in the battery cooling circuit skewing the reading

What to do

Do not open or touch the battery pack or the orange cables: a certified shop is needed. First the temperatures of all sensors are read and compared, then connectors and wiring are checked. If the battery is clearly getting hot, stop and do not use or charge the car.

How to read code P0ACA

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0ACA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (CA) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0ACA mean?

Hybrid/EV battery temperature sensor C circuit fault. The control unit has detected a problem in the circuit of temperature sensor C of the high-voltage battery pack. The code points to a general circuit fault and does not say whether the signal is low, high or unstable. Without this reading, the thermal management of the battery is less precise and the system may limit power.

Can I keep driving with code P0ACA active?

With caution: limp mode possible, have it checked soon

Common causes — P0ACA

Damaged or corroded temperature sensor connector or wiring Faulty temperature sensor C Fault in the battery management control unit Moisture or corrosion in the battery assembly Fault in the battery cooling circuit skewing the reading

How do you fix code P0ACA?

Do not open or touch the battery pack or the orange cables: a certified shop is needed. First the temperatures of all sensors are read and compared, then connectors and wiring are checked. If the battery is clearly getting hot, stop and do not use or charge the car.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes