Skip to content
Fault code dictionary (DTC)

P0ACB — Hybrid/EV battery temperature sensor C: signal out of range

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is getting a value from battery pack temperature sensor C that does not match the other sensors or the real situation, for example a temperature that is stuck or too different from the others. The circuit is not necessarily broken, but the reading is not plausible. The system may limit power and charging as a precaution.
FamilyPowertrain (P)

Typical symptoms

Hybrid system or engine warning light on
Reduced power
Slower or limited charging
Battery cooling fan running more than usual
Fault message on the dashboard

Common causes

Temperature sensor reading inaccurately or stuck at one value
Corroded or loose contacts in the connector
Sensor badly fitted or come away from its seat in the pack
Cooling problem causing real temperature differences between cells
Fault in the battery management control unit

What to do

Do not work on the high-voltage system yourself: a certified shop is needed. The technician should compare the temperatures of all sensors with the battery cold, then check the cooling system. Have it looked at soon, because a badly read temperature can make the battery work in the wrong conditions.

How to read code P0ACB

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0ACB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (CB) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0ACB mean?

Hybrid/EV battery temperature sensor C: signal out of range. The control unit is getting a value from battery pack temperature sensor C that does not match the other sensors or the real situation, for example a temperature that is stuck or too different from the others. The circuit is not necessarily broken, but the reading is not plausible. The system may limit power and charging as a precaution.

Can I keep driving with code P0ACB active?

With caution: limp mode possible, have it checked soon

Common causes — P0ACB

Temperature sensor reading inaccurately or stuck at one value Corroded or loose contacts in the connector Sensor badly fitted or come away from its seat in the pack Cooling problem causing real temperature differences between cells Fault in the battery management control unit

How do you fix code P0ACB?

Do not work on the high-voltage system yourself: a certified shop is needed. The technician should compare the temperatures of all sensors with the battery cold, then check the cooling system. Have it looked at soon, because a badly read temperature can make the battery work in the wrong conditions.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes