Skip to content
Fault code dictionary (DTC)

P0ACE — Hybrid/EV battery temperature sensor C: unstable signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe battery control unit read an irregular, jumping signal from battery temperature sensor C. This does not necessarily mean the battery is hot; it means the reading cannot be trusted. Without a reliable temperature the system cannot protect the battery properly and may limit power.
FamilyPowertrain (P)

Typical symptoms

Hybrid or engine warning light on
Reduced power or limp mode
Battery cooling fan running harder or more often than usual
Limited charging and regenerative braking
Battery charge gauge jumping or looking inconsistent

Common causes

Corroded or loose sensor connector
Chafed wiring with an intermittent contact
Faulty temperature sensor
Moisture or dirt around the battery area
Fault in the battery management unit

What to do

Have the sensor connector and wiring checked, and compare its reading with the other battery temperature sensors. Do not leave this for long, because the battery is running without its full thermal protection. Work on the high-voltage system must be done by qualified staff: do not touch orange cables or battery covers.

How to read code P0ACE

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0ACE starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (CE) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0ACE mean?

Hybrid/EV battery temperature sensor C: unstable signal. The battery control unit read an irregular, jumping signal from battery temperature sensor C. This does not necessarily mean the battery is hot; it means the reading cannot be trusted. Without a reliable temperature the system cannot protect the battery properly and may limit power.

Can I keep driving with code P0ACE active?

With caution: limp mode possible, have it checked soon

Common causes — P0ACE

Corroded or loose sensor connector Chafed wiring with an intermittent contact Faulty temperature sensor Moisture or dirt around the battery area Fault in the battery management unit

How do you fix code P0ACE?

Have the sensor connector and wiring checked, and compare its reading with the other battery temperature sensors. Do not leave this for long, because the battery is running without its full thermal protection. Work on the high-voltage system must be done by qualified staff: do not touch orange cables or battery covers.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes