P0ACF — Battery cooling fan 3: control circuit open
| Meaning | The control unit found that the circuit driving high-voltage battery cooling fan 3 is broken. The fan gets no command and may not run. The battery heats up more easily and the system may cut power to protect it. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power with a hot battery
Battery fan silent when it should be running
Battery temperature rising more than usual
Limited battery charging on hills or in hot weather
Common causes
Broken control wire
Fan fuse or relay
Faulty fan motor
Fault in the module driving the fan
What to do
How to read code P0ACF
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0ACF starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (CF) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0ACF mean?
Battery cooling fan 3: control circuit open. The control unit found that the circuit driving high-voltage battery cooling fan 3 is broken. The fan gets no command and may not run. The battery heats up more easily and the system may cut power to protect it.
Can I keep driving with code P0ACF active?
With caution: limp mode possible, have it checked soon
Common causes — P0ACF
Fan connector unplugged or corroded Broken control wire Fan fuse or relay Faulty fan motor Fault in the module driving the fan
How do you fix code P0ACF?
First check the connector, fuse and wiring of fan 3, then see whether the fan runs when commanded through diagnostics. Have it dealt with soon, especially in hot weather. Avoid heavy use of the car until it is checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0ACE — Hybrid/EV battery temperature sensor C: unstable s...
- Next code: P0AD0 — Battery cooling fan 3: weak performance or not run...
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem