P0AE8 — Battery temperature sensor D circuit fault
| Meaning | The control unit has detected a problem in the circuit of temperature sensor D in the high-voltage battery. The letter D identifies one of the sensors in the battery pack; which one exactly depends on the manufacturer and I cannot say without brand data. Without a reliable temperature the system cannot protect the cells from excessive heat or cold. |
| Family | Powertrain (P) |
Typical symptoms
Limited power or charging
Battery cooling fan always on or noisy
Reduced range
Warning message on the instrument cluster
Common causes
Damaged sensor wiring or connector
Corroded contact inside the battery pack
Battery management unit fault
Moisture in the connector
What to do
How to read code P0AE8
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0AE8 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (E8) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0AE8 mean?
Battery temperature sensor D circuit fault. The control unit has detected a problem in the circuit of temperature sensor D in the high-voltage battery. The letter D identifies one of the sensors in the battery pack; which one exactly depends on the manufacturer and I cannot say without brand data. Without a reliable temperature the system cannot protect the cells from excessive heat or cold.
Can I keep driving with code P0AE8 active?
With caution: limp mode possible, have it checked soon
Common causes — P0AE8
Faulty temperature sensor Damaged sensor wiring or connector Corroded contact inside the battery pack Battery management unit fault Moisture in the connector
How do you fix code P0AE8?
Have the sensor value read with a diagnostic tool at a qualified workshop: the battery pack must not be opened by untrained people. Do not delay too long, as the battery may not be properly protected.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0AE7 — Precharge contactor control circuit high
- Next code: P0AE9 — Battery temperature sensor D implausible reading
Related codes
- P0A00 — Motor electronics coolant temperature sensor circuit fault
- P0A01 — Motor electronics coolant temperature sensor implausible
- P0A02 — Motor electronics coolant temperature sensor signal too low
- P0A03 — Motor electronics coolant temperature sensor signal too high
- P0A04 — Motor electronics coolant temperature sensor intermittent
- P0A05 — Motor electronics coolant pump control circuit open
- P0A06 — Motor electronics coolant pump control circuit low
- P0A07 — Motor electronics coolant pump control circuit high
- P0A08 — DC/DC converter status circuit fault
- P0A09 — DC/DC converter status signal too low
- P0A0A — High voltage system interlock circuit A fault
- P0A0B — High voltage interlock circuit A performance problem