Skip to content
Fault code dictionary (DTC)

P0AEA — Battery temperature sensor D circuit low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is receiving too low a signal from battery temperature sensor D. This usually means the circuit is shorted to ground or the sensor has failed. The system may read a false temperature and protect the battery poorly. The meaning of D depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on
Limited power or charging
Battery cooling fan always at maximum
Reduced range
Warning message on the instrument cluster

Common causes

Sensor wire shorted to ground
Internal short in the sensor
Pinched wiring or damaged insulation
Wet connector
Battery management unit fault

What to do

Have the sensor circuit checked by a workshop qualified for high voltage. You can drive carefully to reach it, but avoid heavy loads.

How to read code P0AEA

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0AEA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (EA) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0AEA mean?

Battery temperature sensor D circuit low. The control unit is receiving too low a signal from battery temperature sensor D. This usually means the circuit is shorted to ground or the sensor has failed. The system may read a false temperature and protect the battery poorly. The meaning of D depends on the manufacturer.

Can I keep driving with code P0AEA active?

With caution: limp mode possible, have it checked soon

Common causes — P0AEA

Sensor wire shorted to ground Internal short in the sensor Pinched wiring or damaged insulation Wet connector Battery management unit fault

How do you fix code P0AEA?

Have the sensor circuit checked by a workshop qualified for high voltage. You can drive carefully to reach it, but avoid heavy loads.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes