Skip to content
Fault code dictionary (DTC)

P0AEB — Battery temperature sensor D circuit high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is receiving too high a signal from battery temperature sensor D. This usually means a broken wire, an unplugged connector or a failed sensor. The temperature read is not reliable. The meaning of D depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on
Limited power or charging
Abnormal battery cooling fan behaviour
Reduced range
Warning message on the instrument cluster

Common causes

Broken sensor wire
Unplugged or corroded connector
Failed sensor
Short to supply voltage
Battery management unit fault

What to do

Have the connectors and sensor checked at a qualified workshop. Do not open the battery pack yourself. Do not delay too long, because without a reliable temperature the battery is less protected.

How to read code P0AEB

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0AEB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (EB) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0AEB mean?

Battery temperature sensor D circuit high. The control unit is receiving too high a signal from battery temperature sensor D. This usually means a broken wire, an unplugged connector or a failed sensor. The temperature read is not reliable. The meaning of D depends on the manufacturer.

Can I keep driving with code P0AEB active?

With caution: limp mode possible, have it checked soon

Common causes — P0AEB

Broken sensor wire Unplugged or corroded connector Failed sensor Short to supply voltage Battery management unit fault

How do you fix code P0AEB?

Have the connectors and sensor checked at a qualified workshop. Do not open the battery pack yourself. Do not delay too long, because without a reliable temperature the battery is less protected.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes