Skip to content
Fault code dictionary (DTC)

P0AED — Drive motor inverter temperature sensor A circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected a problem in the circuit of temperature sensor A on the traction motor inverter. The inverter converts battery current for the electric motor and gets very hot. Without a reliable temperature the system cannot protect it from overheating. Which sensor is A depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on
Reduced power
Warning message on the instrument cluster
Cooling fan or pump always running
Vehicle will not enter Ready

Common causes

Faulty temperature sensor
Damaged wiring or connector
Corroded contact
Fault in the inverter board
Moisture in the connector

What to do

Have the fault diagnosed at a workshop qualified for high voltage. Check the inverter coolant level only if the manual says so, without opening any covers. Avoid heavy loads.

How to read code P0AED

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0AED starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (ED) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0AED mean?

Drive motor inverter temperature sensor A circuit fault. The control unit has detected a problem in the circuit of temperature sensor A on the traction motor inverter. The inverter converts battery current for the electric motor and gets very hot. Without a reliable temperature the system cannot protect it from overheating. Which sensor is A depends on the manufacturer.

Can I keep driving with code P0AED active?

With caution: limp mode possible, have it checked soon

Common causes — P0AED

Faulty temperature sensor Damaged wiring or connector Corroded contact Fault in the inverter board Moisture in the connector

How do you fix code P0AED?

Have the fault diagnosed at a workshop qualified for high voltage. Check the inverter coolant level only if the manual says so, without opening any covers. Avoid heavy loads.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes