Skip to content
Fault code dictionary (DTC)

P0AEC — Battery temperature sensor D intermittent signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected that the signal from battery temperature sensor D comes and goes or has sudden jumps. It is often a contact that breaks at times. The meaning of D depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light that comes and goes
Power or charging changing for no reason
Battery cooling fan starting and stopping
Fault appearing with vibration or heat
Warning message on the instrument cluster

Common causes

Loose or corroded connector
Partly broken wire
Faulty sensor
Moisture in the connector
Battery management unit fault

What to do

Have connectors and wiring checked at a qualified workshop. Intermittent faults are the hardest to find, so tell them when it appears. Do not ignore it: it can become permanent.

How to read code P0AEC

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0AEC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (EC) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0AEC mean?

Battery temperature sensor D intermittent signal. The control unit has detected that the signal from battery temperature sensor D comes and goes or has sudden jumps. It is often a contact that breaks at times. The meaning of D depends on the manufacturer.

Can I keep driving with code P0AEC active?

With caution: limp mode possible, have it checked soon

Common causes — P0AEC

Loose or corroded connector Partly broken wire Faulty sensor Moisture in the connector Battery management unit fault

How do you fix code P0AEC?

Have connectors and wiring checked at a qualified workshop. Intermittent faults are the hardest to find, so tell them when it appears. Do not ignore it: it can become permanent.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes