Skip to content
Fault code dictionary (DTC)

P0AF5 — Inverter temperature sensor B circuit high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is receiving too high a signal from inverter temperature sensor B. This usually means a broken wire, an unplugged connector or a failed sensor. The temperature read is not reliable. The meaning of B depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on
Reduced power
Abnormal cooling fan or pump behaviour
Warning message on the instrument cluster
Vehicle will not enter Ready

Common causes

Broken sensor wire
Unplugged or corroded connector
Failed sensor
Short to supply voltage
Fault in the inverter board

What to do

Have connectors and sensor checked at a qualified workshop. Do not work on the inverter yourself. Do not delay too long, because without a reliable temperature the inverter is less protected.

How to read code P0AF5

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0AF5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (A) points to hybrid propulsion, and the last two (F5) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0AF5 mean?

Inverter temperature sensor B circuit high. The control unit is receiving too high a signal from inverter temperature sensor B. This usually means a broken wire, an unplugged connector or a failed sensor. The temperature read is not reliable. The meaning of B depends on the manufacturer.

Can I keep driving with code P0AF5 active?

With caution: limp mode possible, have it checked soon

Common causes — P0AF5

Broken sensor wire Unplugged or corroded connector Failed sensor Short to supply voltage Fault in the inverter board

How do you fix code P0AF5?

Have connectors and sensor checked at a qualified workshop. Do not work on the inverter yourself. Do not delay too long, because without a reliable temperature the inverter is less protected.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes