Skip to content
Fault code dictionary (DTC)

P0E37 — DC/DC converter voltage sensor B: out-of-range reading

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit gets a value from DC/DC converter voltage sensor B that does not match what is expected or the other sensors. The circuit is not necessarily open, but the measurement does not add up. Regulation of the 12 V battery may be affected.
FamilyPowertrain (P)

Typical symptoms

Charging system or hybrid warning light on
12 V battery flat or overcharged
Lights with varying brightness
Dashboard error messages

Common causes

Sensor giving inaccurate readings
Abnormal resistance in wiring or connector
DC/DC converter regulating poorly
Deteriorated 12 V battery
Control unit software issue

What to do

Have the real voltage measured and compared with what the car reads. Checking the converter is a job for a qualified shop. Do not wait too long: a flat 12 V battery can leave you stranded.

How to read code P0E37

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0E37 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0E37 mean?

DC/DC converter voltage sensor B: out-of-range reading. The control unit gets a value from DC/DC converter voltage sensor B that does not match what is expected or the other sensors. The circuit is not necessarily open, but the measurement does not add up. Regulation of the 12 V battery may be affected.

Can I keep driving with code P0E37 active?

With caution: limp mode possible, have it checked soon

Common causes — P0E37

Sensor giving inaccurate readings Abnormal resistance in wiring or connector DC/DC converter regulating poorly Deteriorated 12 V battery Control unit software issue

How do you fix code P0E37?

Have the real voltage measured and compared with what the car reads. Checking the converter is a job for a qualified shop. Do not wait too long: a flat 12 V battery can leave you stranded.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes