P0E43 — Hybrid/EV powertrain control module B fault
| Meaning | The control unit reported a problem in hybrid/EV powertrain control module B, one of the control units that manage the drive system. The code is generic: which module is 'B' and what it does is decided by the manufacturer, and I cannot say for certain which one it is on your car. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Car does not start or does not go into drive mode
Charging does not work
Other communication codes stored along with this one
Common causes
Insufficient power or ground supply to the module
Damaged module connectors or wiring
Communication problems with other control units
Weak 12-volt battery disturbing the modules
What to do
How to read code P0E43
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E43 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E43 mean?
Hybrid/EV powertrain control module B fault. The control unit reported a problem in hybrid/EV powertrain control module B, one of the control units that manage the drive system. The code is generic: which module is 'B' and what it does is decided by the manufacturer, and I cannot say for certain which one it is on your car.
Can I keep driving with code P0E43 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E43
Internal module failure Insufficient power or ground supply to the module Damaged module connectors or wiring Communication problems with other control units Weak 12-volt battery disturbing the modules
How do you fix code P0E43?
First check the 12-volt battery and its connections, because low voltage often causes module errors. Then a full code read with a tool suited to your brand is needed. If the car loses power or goes into limp mode, stop safely and do not push on.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E42 — Charge status indicator B: circuit signal high
- Next code: P0E44 — Traction battery voltage sensor E: circuit fault
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high