P0E85 — Battery charger B temperature too high
| Meaning | The control unit detected that charger B, the on-board module that converts mains power to charge the traction battery, is too hot. To protect itself it may slow or stop charging. Which unit is B depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Charging slower than usual or interrupted
Charging error message on the display
Cooling fans or pump very active
Charging that stops on hot days
Common causes
Low level or poor circulation of coolant
Faulty fan or pump
Repeated high-power charging in strong heat
Wrong module temperature sensor
Internal charger fault
What to do
How to read code P0E85
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E85 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E85 mean?
Battery charger B temperature too high. The control unit detected that charger B, the on-board module that converts mains power to charge the traction battery, is too hot. To protect itself it may slow or stop charging. Which unit is B depends on the manufacturer.
Can I keep driving with code P0E85 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E85
Insufficient cooling of the charger Low level or poor circulation of coolant Faulty fan or pump Repeated high-power charging in strong heat Wrong module temperature sensor Internal charger fault
How do you fix code P0E85?
Stop charging, let the car cool down and try again in a shaded place. If the code returns, have the charger's cooling system checked. Do not force repeated charging until the problem is understood.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E84 — Auxiliary cooling temperature sensor A circuit hig...
- Next code: P0E86 — Battery charger B input voltage too low
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high