Skip to content
Fault code dictionary (DTC)

P0E8D — Drive motor A inverter voltage sensor B range/performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit receives a voltage value from sensor B on the inverter of traction motor A that does not match what is expected or what other sensors report. The circuit is not necessarily broken, but the measurement cannot be trusted. Power management may therefore be limited. The exact function of sensor B depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Warning light on
Reduced power or limp mode
Uneven acceleration
Car shuts down or will not restart
Drive system fault message

Common causes

Drifting or faulty voltage sensor
Oxidized connector contacts
Harness with abnormal resistance
Unstable supply voltage to the module
Internal inverter fault
Weak 12 V auxiliary battery

What to do

First check that the 12 V battery is in good condition, because low voltage can cause odd readings. Then have the inverter data checked at a qualified workshop: it is a high-voltage component and must not be touched yourself. Do not put it off if power drops.

How to read code P0E8D

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0E8D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0E8D mean?

Drive motor A inverter voltage sensor B range/performance. The control unit receives a voltage value from sensor B on the inverter of traction motor A that does not match what is expected or what other sensors report. The circuit is not necessarily broken, but the measurement cannot be trusted. Power management may therefore be limited. The exact function of sensor B depends on the manufacturer.

Can I keep driving with code P0E8D active?

With caution: limp mode possible, have it checked soon

Common causes — P0E8D

Drifting or faulty voltage sensor Oxidized connector contacts Harness with abnormal resistance Unstable supply voltage to the module Internal inverter fault Weak 12 V auxiliary battery

How do you fix code P0E8D?

First check that the 12 V battery is in good condition, because low voltage can cause odd readings. Then have the inverter data checked at a qualified workshop: it is a high-voltage component and must not be touched yourself. Do not put it off if power drops.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes