P0EAA — A/C compressor motor voltage sensor B: signal too high
| Meaning | The control unit found that the signal from voltage sensor "B" on the A/C compressor motor is above the expected maximum. It can be an electrical problem in the measuring circuit or a wrong reading from the sensor. The system usually shuts the compressor down for safety. |
| Family | Powertrain (P) |
Typical symptoms
Warning light on
Compressor not running
Warning messages on the dashboard
Hot cabin even with the A/C on
Common causes
Faulty voltage sensor
Damaged or damp connector
Faulty compressor inverter
Sensor reference supply out of range
What to do
How to read code P0EAA
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0EAA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0EAA mean?
A/C compressor motor voltage sensor B: signal too high. The control unit found that the signal from voltage sensor "B" on the A/C compressor motor is above the expected maximum. It can be an electrical problem in the measuring circuit or a wrong reading from the sensor. The system usually shuts the compressor down for safety.
Can I keep driving with code P0EAA active?
With caution: limp mode possible, have it checked soon
Common causes — P0EAA
Signal wire shorted to the supply voltage Faulty voltage sensor Damaged or damp connector Faulty compressor inverter Sensor reference supply out of range
How do you fix code P0EAA?
Have the wiring, connectors and sensor values checked with a diagnostic tool. Work on the high-voltage circuit must be done by qualified personnel. You can keep driving, but without air conditioning.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0EA9 — A/C compressor motor voltage sensor B: performance...
- Next code: P0EAB — A/C compressor motor voltage sensor B: signal too...
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high