P0EB1 — A/C compressor motor phase U current sensor: circuit fault
| Meaning | The control unit detected a problem in the circuit of the sensor that measures current on phase U of the A/C compressor motor. The compressor motor is three-phase, and the inverter controls each phase by measuring it with dedicated sensors. The code doesn't say whether the signal is high, low or unstable. |
| Family | Powertrain (P) |
Typical symptoms
Warning light on
Compressor not starting or running roughly
Warning messages related to the climate system
Unusual noises or vibration from the compressor
Common causes
Faulty phase U current sensor
Fault in the compressor inverter
Compressor motor with degraded winding
Faulty control unit
What to do
How to read code P0EB1
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0EB1 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0EB1 mean?
A/C compressor motor phase U current sensor: circuit fault. The control unit detected a problem in the circuit of the sensor that measures current on phase U of the A/C compressor motor. The compressor motor is three-phase, and the inverter controls each phase by measuring it with dedicated sensors. The code doesn't say whether the signal is high, low or unstable.
Can I keep driving with code P0EB1 active?
With caution: limp mode possible, have it checked soon
Common causes — P0EB1
Damaged compressor wiring or connector Faulty phase U current sensor Fault in the compressor inverter Compressor motor with degraded winding Faulty control unit
How do you fix code P0EB1?
Have the wiring and connectors checked and the data read with a diagnostic tool. High voltage requires qualified personnel. You can drive, but the air conditioning may not work.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0EB0 — A/C compressor motor current sensor: signal too hi...
- Next code: P0EB2 — A/C compressor motor phase U current sensor: signa...
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high