Skip to content
Fault code dictionary (DTC)

P0EBA — A/C compressor: phase W current sensor out of range

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found that the current measured on phase W of the A/C compressor motor does not match what is expected or what the other phases show. The circuit is not open, but the reading is not reliable. The unit may limit or stop the compressor to protect it.
FamilyPowertrain (P)

Typical symptoms

Weak or unstable cooling
Compressor stopping and restarting
Noise or vibration from the compressor
Warning light on
A/C performance changing for no clear reason

Common causes

Phase W current sensor out of calibration
Compressor with internal wear
Connections with high resistance
Abnormal load in the refrigerant circuit
Partially failed compressor inverter

What to do

First check connectors and wiring, then the condition of the refrigerant circuit. A proper diagnosis with the right tool is needed and, on high voltage, qualified personnel. Better not to use the A/C until it has been checked.

How to read code P0EBA

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0EBA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0EBA mean?

A/C compressor: phase W current sensor out of range. The control unit found that the current measured on phase W of the A/C compressor motor does not match what is expected or what the other phases show. The circuit is not open, but the reading is not reliable. The unit may limit or stop the compressor to protect it.

Can I keep driving with code P0EBA active?

With caution: limp mode possible, have it checked soon

Common causes — P0EBA

Phase W current sensor out of calibration Compressor with internal wear Connections with high resistance Abnormal load in the refrigerant circuit Partially failed compressor inverter

How do you fix code P0EBA?

First check connectors and wiring, then the condition of the refrigerant circuit. A proper diagnosis with the right tool is needed and, on high voltage, qualified personnel. Better not to use the A/C until it has been checked.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes