Skip to content
Fault code dictionary (DTC)

P0EBB — A/C compressor: phase V current sensor circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a general problem in the current sensor circuit for phase V of the A/C compressor motor. The code does not say whether the signal is high or low: it only says the circuit is not working as expected. The compressor may be limited or stopped.
FamilyPowertrain (P)

Typical symptoms

A/C does not cool or cools poorly
Compressor does not start or stops
Warning light on
A/C works on and off
Other compressor codes stored in memory

Common causes

Connector or terminal at the compressor in poor condition
Damaged phase V wiring
Faulty phase V current sensor
Incorrect power or ground at the module
Internal failure of the compressor inverter

What to do

First check the compressor connectors and wiring and read whether other related codes are stored, as they help narrow down the fault. Work on high voltage must be done only by qualified personnel. You can drive without A/C, but do not delay for long.

How to read code P0EBB

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0EBB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0EBB mean?

A/C compressor: phase V current sensor circuit fault. The control unit detected a general problem in the current sensor circuit for phase V of the A/C compressor motor. The code does not say whether the signal is high or low: it only says the circuit is not working as expected. The compressor may be limited or stopped.

Can I keep driving with code P0EBB active?

With caution: limp mode possible, have it checked soon

Common causes — P0EBB

Connector or terminal at the compressor in poor condition Damaged phase V wiring Faulty phase V current sensor Incorrect power or ground at the module Internal failure of the compressor inverter

How do you fix code P0EBB?

First check the compressor connectors and wiring and read whether other related codes are stored, as they help narrow down the fault. Work on high voltage must be done only by qualified personnel. You can drive without A/C, but do not delay for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes