Skip to content
Fault code dictionary (DTC)

P0EEB — Charge port temperature sensor B: intermittent signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected that the signal from charge port temperature sensor B comes and goes or jumps erratically. It usually points to an unstable electrical contact. Which point of the port is sensor B depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Charging that stops intermittently
Charging error that appears only sometimes
Warning light that comes on and goes off
Slower charging at certain times
Problem that gets worse with vibration or moisture

Common causes

Connector with unstable contact
Partly damaged sensor wire
Moisture or oxidation in the port
Sensor with an internal defect
Charging control unit with a faulty input

What to do

Have the connector and wiring of sensor B checked, gently moving the wires during the reading to bring the fault out. An intermittent fault tends to get worse, so it is best not to wait too long.

How to read code P0EEB

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0EEB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0EEB mean?

Charge port temperature sensor B: intermittent signal. The control unit has detected that the signal from charge port temperature sensor B comes and goes or jumps erratically. It usually points to an unstable electrical contact. Which point of the port is sensor B depends on the manufacturer.

Can I keep driving with code P0EEB active?

With caution: limp mode possible, have it checked soon

Common causes — P0EEB

Connector with unstable contact Partly damaged sensor wire Moisture or oxidation in the port Sensor with an internal defect Charging control unit with a faulty input

How do you fix code P0EEB?

Have the connector and wiring of sensor B checked, gently moving the wires during the reading to bring the fault out. An intermittent fault tends to get worse, so it is best not to wait too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes