P0EF6 — Drive motor C over temperature
| Meaning | The drive motor C temperature sensor reported a temperature above the allowed limit. Here the signal is considered trustworthy: the motor really is overheating and the control unit limits power to protect it. The letter C identifies a specific motor or winding, and its exact meaning depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Overheating message on the dashboard
Cooling fans and pump working hard
Car stopping or refusing to accelerate after heavy use
Common causes
Faulty cooling pump or fan
Clogged or dirty radiator or coolant passages
Prolonged heavy use such as long climbs or towing
Sensor reporting a wrong value, less likely
What to do
How to read code P0EF6
This is a critical fault: vehicle safety or integrity may be compromised, so diagnosis should not be postponed.
The code P0EF6 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0EF6 mean?
Drive motor C over temperature. The drive motor C temperature sensor reported a temperature above the allowed limit. Here the signal is considered trustworthy: the motor really is overheating and the control unit limits power to protect it. The letter C identifies a specific motor or winding, and its exact meaning depends on the manufacturer.
Can I keep driving with code P0EF6 active?
With caution: limp mode possible, have it checked soon
Common causes — P0EF6
Low coolant or poor circulation in the electric motor cooling circuit Faulty cooling pump or fan Clogged or dirty radiator or coolant passages Prolonged heavy use such as long climbs or towing Sensor reporting a wrong value, less likely
How do you fix code P0EF6?
Stop safely and let the car cool down without pushing it. Then have the coolant level and circulation checked, along with the pump and fans. Overheating can damage the motor, so treat this with urgency.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0EF5 — Drive motor C temperature sensor signal erratic
- Next code: P0EF7 — Battery charger A input voltage sensor B circuit f...
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high