P0EF7 — Battery charger A input voltage sensor B circuit fault
| Meaning | The control unit detected a general problem in the circuit of sensor B, which measures the input voltage to onboard charger A. The charger cannot properly monitor the power coming from the socket. The letters A and B identify a specific charger and sensor, and their exact meaning depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Charging not starting or stopping partway
Slower charging than usual
Charging error message on the dashboard
Works on some outlets but not others
Common causes
Sensor or internal charger circuit fault
Power supply or ground problem at the module
Moisture or corrosion in the connectors
Charger control unit fault
What to do
How to read code P0EF7
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0EF7 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0EF7 mean?
Battery charger A input voltage sensor B circuit fault. The control unit detected a general problem in the circuit of sensor B, which measures the input voltage to onboard charger A. The charger cannot properly monitor the power coming from the socket. The letters A and B identify a specific charger and sensor, and their exact meaning depends on the manufacturer.
Can I keep driving with code P0EF7 active?
With caution: limp mode possible, have it checked soon
Common causes — P0EF7
Damaged wiring or connector of the voltage sensor Sensor or internal charger circuit fault Power supply or ground problem at the module Moisture or corrosion in the connectors Charger control unit fault
How do you fix code P0EF7?
Try charging from a different outlet or charging station to see whether the external supply is the cause. Then have the charger connectors and wiring checked. It is not usually an immediate safety issue, but you may be left unable to charge.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0EF6 — Drive motor C over temperature
- Next code: P0EF8 — Battery charger A input voltage sensor B reading n...
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high