P0EFC — Battery charger A input voltage sensor C reading not plausible
| Meaning | Sensor C, which measures the input voltage to charger A, gives a value that does not match what is expected or what other sensors show. The voltage may be real but misread, or the sensor may be out of calibration. The letters A and C identify a specific charger and sensor, and their exact meaning depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Slow charging or limited charging power
Charging stopping for no apparent reason
Charging error message
Odd mains voltage shown on the scan tool
Common causes
High-resistance connections from corrosion
Unstable mains supply or unsuitable extension lead
Partly damaged wiring
Internal charger fault
What to do
How to read code P0EFC
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0EFC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0EFC mean?
Battery charger A input voltage sensor C reading not plausible. Sensor C, which measures the input voltage to charger A, gives a value that does not match what is expected or what other sensors show. The voltage may be real but misread, or the sensor may be out of calibration. The letters A and C identify a specific charger and sensor, and their exact meaning depends on the manufacturer.
Can I keep driving with code P0EFC active?
With caution: limp mode possible, have it checked soon
Common causes — P0EFC
Voltage sensor out of calibration or faulty High-resistance connections from corrosion Unstable mains supply or unsuitable extension lead Partly damaged wiring Internal charger fault
How do you fix code P0EFC?
First rule out the external supply: try another outlet or charging station and avoid extension leads. If the code returns, have the charger checked with a scan tool.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0EFB — Battery charger A input voltage sensor C circuit f...
- Next code: P0EFD — Battery charger A input voltage sensor C signal lo...
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high