Skip to content
Fault code dictionary (DTC)

P0EFB — Battery charger A input voltage sensor C circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a general problem in the circuit of sensor C, which measures the input voltage to onboard charger A. The charger cannot properly monitor the power coming from the socket. The letters A and C identify a specific charger and sensor, and their exact meaning depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Warning light on
Charging not starting or stopping partway
Slower charging than usual
Charging error message on the dashboard
Works on some outlets but not others

Common causes

Damaged wiring or connector of the voltage sensor
Sensor or internal charger circuit fault
Power supply or ground problem at the module
Moisture or corrosion in the connectors
Charger control unit fault

What to do

Try charging from a different outlet or charging station to see whether the external supply is the cause. Then have the charger connectors and wiring checked. It is not usually an immediate safety issue, but you may be left unable to charge.

How to read code P0EFB

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0EFB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0EFB mean?

Battery charger A input voltage sensor C circuit fault. The control unit detected a general problem in the circuit of sensor C, which measures the input voltage to onboard charger A. The charger cannot properly monitor the power coming from the socket. The letters A and C identify a specific charger and sensor, and their exact meaning depends on the manufacturer.

Can I keep driving with code P0EFB active?

With caution: limp mode possible, have it checked soon

Common causes — P0EFB

Damaged wiring or connector of the voltage sensor Sensor or internal charger circuit fault Power supply or ground problem at the module Moisture or corrosion in the connectors Charger control unit fault

How do you fix code P0EFB?

Try charging from a different outlet or charging station to see whether the external supply is the cause. Then have the charger connectors and wiring checked. It is not usually an immediate safety issue, but you may be left unable to charge.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes