P1125 — Throttle position sensor: intermittent signal
| Meaning | P1125 is a manufacturer-defined code. The reference definition indicates an intermittent signal from the throttle position sensor. The control unit sees the accelerator position jump or vanish in an unrealistic way, and when that happens it no longer knows how much power to give you. Usually there is an electrical contact making a false connection or a worn sensor. |
| Family | Powertrain (P) |
Typical symptoms
Jerks or flat spots under acceleration
Idle fluctuating or stalling
Automatic gearbox shifting badly or unexpectedly
Sudden loss of power that then returns to normal
Engine going into limp mode on and off
Common causes
Connector with weak or corroded contact
Signal wire broken intermittently
Wiring chafed or damaged by vibration
Sensor loose on the throttle body
Dirty or loose throttle body
What to do
How to read code P1125
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P1125 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (1) points to fuel and air metering, and the last two (25) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P1125 mean?
Throttle position sensor: intermittent signal. P1125 is a manufacturer-defined code. The reference definition indicates an intermittent signal from the throttle position sensor. The control unit sees the accelerator position jump or vanish in an unrealistic way, and when that happens it no longer knows how much power to give you. Usually there is an electrical contact making a false connection or a worn sensor.
Can I keep driving with code P1125 active?
With caution: limp mode possible, have it checked soon
Common causes — P1125
Worn track in the throttle position sensor Connector with weak or corroded contact Signal wire broken intermittently Wiring chafed or damaged by vibration Sensor loose on the throttle body Dirty or loose throttle body
How do you fix code P1125?
Check the sensor connector and wiring, moving the wires with the engine running to see if the fault appears. Have the signal read with a tester while slowly pressing the pedal: it should rise continuously. A sudden loss of power can be dangerous when overtaking or at junctions, so have it fixed soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P1124 — Throttle position sensor: outside self-test range
- Next code: P1126 — Throttle position sensor circuit (narrow range)
Related codes
- P1100 — Mass airflow (MAF) sensor signal intermittent
- P1101 — Mass airflow (MAF) sensor out of range in self-test / KOER a...
- P1102 — Mass airflow (MAF) sensor in range but lower than expected
- P1103 — Mass airflow (MAF) sensor in range but higher than expected
- P1104 — Mass airflow (MAF) sensor ground malfunction
- P1105 — Dual alternator system fault reported (upper unit)
- P1106 — Dual alternator lower fault / MAP sensor intermittent high v...
- P1107 — Dual alternator lower fault / MAP sensor intermittent low vo...
- P1108 — Battery lamp circuit, dual alternator: malfunction
- P1109 — Intake air temperature sensor B: intermittent signal
- P1110 — Intake air temperature sensor: open or short circuit
- P1111 — Intake air temperature sensor: intermittent high voltage