Skip to content
Fault code dictionary (DTC)

P1267 — Cylinder 7: short between high side and low side

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a short circuit in the drive circuit linked to cylinder 7, between the high side and the low side. P1267 is manufacturer-defined and I have no reliable information on which component is involved on your make: it usually concerns injectors, but I can't confirm that.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Rough running
Loss of power
Jerking when accelerating
Hard starting

Common causes

Cylinder 7 driven component (for example an injector) with a shorted winding
Crushed or chafed harness wire touching ground or another wire
Damp or corroded cylinder 7 connector
Harness damaged near hot or moving parts
Damaged internal driver in the control unit (rare)

What to do

First check the connector and wiring of cylinder 7, looking for chafed wires or moisture. Then have the driven component measured. With a cylinder not working properly, get it checked soon.

How to read code P1267

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P1267 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (2) points to fuel and air metering (injector circuit), and the last two (67) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P1267 mean?

Cylinder 7: short between high side and low side. The control unit detected a short circuit in the drive circuit linked to cylinder 7, between the high side and the low side. P1267 is manufacturer-defined and I have no reliable information on which component is involved on your make: it usually concerns injectors, but I can't confirm that.

Can I keep driving with code P1267 active?

With caution: limp mode possible, have it checked soon

Common causes — P1267

Cylinder 7 driven component (for example an injector) with a shorted winding Crushed or chafed harness wire touching ground or another wire Damp or corroded cylinder 7 connector Harness damaged near hot or moving parts Damaged internal driver in the control unit (rare)

How do you fix code P1267?

First check the connector and wiring of cylinder 7, looking for chafed wires or moisture. Then have the driven component measured. With a cylinder not working properly, get it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes