Skip to content
Fault code dictionary (DTC)

P1389 — Glow plug circuit: low voltage on the supply side

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measured a voltage that is too low on the supply side of the glow plug circuit. The code is defined by the manufacturer and the reference title is confusing: I have no reliable information on how your make uses it. Glow plugs help a diesel engine start when cold, so the problem shows up mostly in cold weather.
FamilyPowertrain (P)

Typical symptoms

Glow plug light or check engine light on
Hard starting when cold
White or grey smoke after starting
Rough running in the first few minutes
Harsher engine noise when cold

Common causes

Corroded or loose connections in the glow plug circuit
Faulty glow plug relay
Weak battery or dirty terminals
Blown fuse or supply line with voltage drop
Glow plugs shorted or with abnormal resistance
Faulty glow plug control unit

What to do

Check the battery and terminals first, because low voltage can cause this error. Then have the relay, supply and glow plugs checked. Starting can get worse in the cold, so don't wait until winter.

How to read code P1389

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P1389 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the manufacturer, so the exact meaning can change from make to make. The third character (3) points to ignition system or misfire, and the last two (89) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P1389 mean?

Glow plug circuit: low voltage on the supply side. The control unit measured a voltage that is too low on the supply side of the glow plug circuit. The code is defined by the manufacturer and the reference title is confusing: I have no reliable information on how your make uses it. Glow plugs help a diesel engine start when cold, so the problem shows up mostly in cold weather.

Can I keep driving with code P1389 active?

With caution: limp mode possible, have it checked soon

Common causes — P1389

Corroded or loose connections in the glow plug circuit Faulty glow plug relay Weak battery or dirty terminals Blown fuse or supply line with voltage drop Glow plugs shorted or with abnormal resistance Faulty glow plug control unit

How do you fix code P1389?

Check the battery and terminals first, because low voltage can cause this error. Then have the relay, supply and glow plugs checked. Starting can get worse in the cold, so don't wait until winter.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes