P201D — Cylinder 1 injector: circuit or operation fault
| Meaning | The control unit detected a fault in the cylinder 1 injector circuit. The reference text points to the generic code P0201. The precise meaning of this code is set by the manufacturer, so confirmation needs your make's own data. |
| Family | Powertrain (P) |
Typical symptoms
Rough running with vibration
Misfires on one cylinder
Loss of power
Hard starting
Smell of unburnt fuel
Common causes
Damaged injector connector or wiring
Injector coil resistance out of range
Earth or supply problem in the circuit
Faulty driver stage in the control unit (rare)
What to do
How to read code P201D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P201D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (1D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P201D mean?
Cylinder 1 injector: circuit or operation fault. The control unit detected a fault in the cylinder 1 injector circuit. The reference text points to the generic code P0201. The precise meaning of this code is set by the manufacturer, so confirmation needs your make's own data.
Can I keep driving with code P201D active?
With caution: limp mode possible, have it checked soon
Common causes — P201D
Faulty cylinder 1 injector Damaged injector connector or wiring Injector coil resistance out of range Earth or supply problem in the circuit Faulty driver stage in the control unit (rare)
How do you fix code P201D?
Check the injector connector and wiring and measure the coil resistance. If the engine runs unevenly, avoid using it for long: unburnt fuel can damage the catalytic converter.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P201C — Fuel tank pressure sensor: electrical fault
- Next code: P201E — Cylinder injector circuit fault (ambiguous referen...
Related codes
- P2000 — NOx trap efficiency below threshold, bank 1
- P2001 — NOx trap efficiency below threshold, bank 2
- P2002 — Diesel particulate filter (DPF) clogged
- P2003 — Particulate filter efficiency below threshold, bank 2
- P2004 — Intake manifold runner control stuck open, bank 1
- P2005 — Intake runner control stuck open (bank 2)
- P2006 — Intake runner control stuck closed (bank 1)
- P2007 — Intake runner control stuck closed (bank 2)
- P2008 — Intake runner control circuit open (bank 1)
- P2009 — Intake runner control circuit low (bank 1)
- P200A — P200A: meaning is manufacturer dependent, needs verifying
- P200B — P200B: meaning is manufacturer dependent, needs verifying