Skip to content
Fault code dictionary (DTC)

P202D — Coolant temperature sensor: implausible signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the coolant temperature sensor value is not plausible, for example it doesn't change as the engine warms up or differs from other measured temperatures. The reference text points to the generic code P0115. Coolant temperature is important data for injection, cooling fan and ignition.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Hard starting when cold or hot
Cooling fan always running or not starting
Temperature gauge not moving or jumping
Higher fuel use and uneven running

Common causes

Faulty coolant temperature sensor
Damaged or corroded connector or wiring
Low coolant level or air in the circuit
Thermostat preventing the engine warming up properly
Internal control unit fault (rare)

What to do

Check the coolant level on a cold engine and the condition of the sensor connector and wiring, then compare the reading with a real temperature. If the temperature gauge climbs too high, stop: an overheated engine can be seriously damaged.

How to read code P202D

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P202D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (2D) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P202D mean?

Coolant temperature sensor: implausible signal. The control unit detected that the coolant temperature sensor value is not plausible, for example it doesn't change as the engine warms up or differs from other measured temperatures. The reference text points to the generic code P0115. Coolant temperature is important data for injection, cooling fan and ignition.

Can I keep driving with code P202D active?

With caution: limp mode possible, have it checked soon

Common causes — P202D

Faulty coolant temperature sensor Damaged or corroded connector or wiring Low coolant level or air in the circuit Thermostat preventing the engine warming up properly Internal control unit fault (rare)

How do you fix code P202D?

Check the coolant level on a cold engine and the condition of the sensor connector and wiring, then compare the reading with a real temperature. If the temperature gauge climbs too high, stop: an overheated engine can be seriously damaged.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes