Skip to content
Fault code dictionary (DTC)

P202E — Throttle valve actuator (M16/6) - manufacturer-defined code

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis code is not defined by the generic standard but by the manufacturer. The reference title points to the throttle valve actuator, labelled M16/6 by Mercedes-Benz. On other brands I have no reliable information on its exact meaning. The control unit has detected a problem in the circuit or operation of that component.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Engine in limp mode with reduced power
Irregular or delayed throttle response
Unstable idle or engine stalling
Accelerator pedal seems unresponsive

Common causes

Dirty throttle body or sticking movement
Faulty throttle actuator
Corroded connector or damaged wiring
Low supply voltage or poor ground
Faulty engine control unit (rare)

What to do

Have live data read to compare the requested and actual throttle position. Check the connector, wiring and cleanliness of the throttle body. If the car goes into limp mode, avoid overtaking and have it checked soon.

How to read code P202E

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P202E starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (2E) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P202E mean?

Throttle valve actuator (M16/6) - manufacturer-defined code. This code is not defined by the generic standard but by the manufacturer. The reference title points to the throttle valve actuator, labelled M16/6 by Mercedes-Benz. On other brands I have no reliable information on its exact meaning. The control unit has detected a problem in the circuit or operation of that component.

Can I keep driving with code P202E active?

With caution: limp mode possible, have it checked soon

Common causes — P202E

Dirty throttle body or sticking movement Faulty throttle actuator Corroded connector or damaged wiring Low supply voltage or poor ground Faulty engine control unit (rare)

How do you fix code P202E?

Have live data read to compare the requested and actual throttle position. Check the connector, wiring and cleanliness of the throttle body. If the car goes into limp mode, avoid overtaking and have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes