P207E — Cylinders 4-6 catalytic converter efficiency low, ref. P0422
| Meaning | In the reference definition the control unit judges that the catalytic converter for cylinders 4-6 isn't cleaning the exhaust gases as well as it should, linking it to the P0422 fault. P207E is manufacturer-defined and I have no reliable information on other brands. The catalytic converter has lost part of its efficiency. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or less lively engine
Higher emissions, failed emissions test
Unusual exhaust smell
No obvious symptoms in some cases
Common causes
Faulty downstream oxygen sensor or one reading incorrectly
Exhaust leaks before or near the sensors
Rich mixture or irregular ignition that damaged the catalytic converter
Damaged sensor wiring or connector
What to do
How to read code P207E
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P207E starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (7E) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P207E mean?
Cylinders 4-6 catalytic converter efficiency low, ref. P0422. In the reference definition the control unit judges that the catalytic converter for cylinders 4-6 isn't cleaning the exhaust gases as well as it should, linking it to the P0422 fault. P207E is manufacturer-defined and I have no reliable information on other brands. The catalytic converter has lost part of its efficiency.
Can I keep driving with code P207E active?
With caution: limp mode possible, have it checked soon
Common causes — P207E
Aged or damaged catalytic converter Faulty downstream oxygen sensor or one reading incorrectly Exhaust leaks before or near the sensors Rich mixture or irregular ignition that damaged the catalytic converter Damaged sensor wiring or connector
How do you fix code P207E?
First check the oxygen sensors and that the exhaust has no leaks, before blaming the catalytic converter. If the engine is misfiring, have it seen immediately, because that can damage it; otherwise don't put it off too long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P207D — Missing or incorrect CAN message from the ignition...
- Next code: P207F — AdBlue (DEF) fluid quality out of specification
Related codes
- P2000 — NOx trap efficiency below threshold, bank 1
- P2001 — NOx trap efficiency below threshold, bank 2
- P2002 — Diesel particulate filter (DPF) clogged
- P2003 — Particulate filter efficiency below threshold, bank 2
- P2004 — Intake manifold runner control stuck open, bank 1
- P2005 — Intake runner control stuck open (bank 2)
- P2006 — Intake runner control stuck closed (bank 1)
- P2007 — Intake runner control stuck closed (bank 2)
- P2008 — Intake runner control circuit open (bank 1)
- P2009 — Intake runner control circuit low (bank 1)
- P200A — P200A: meaning is manufacturer dependent, needs verifying
- P200B — P200B: meaning is manufacturer dependent, needs verifying