P207D — Missing or incorrect CAN message from the ignition/key module (EIS)
| Meaning | In the reference definition the engine control unit doesn't receive the CAN message from the electronic ignition module (N73, typical of some Mercedes models), or receives it incorrectly. P207D is manufacturer-defined and I have no reliable information on other brands. The ignition and immobiliser data isn't arriving correctly. |
| Family | Powertrain (P) |
Typical symptoms
Hard starting or engine that won't start
Engine that stalls a few seconds after starting
Other warning lights on together
Key or immobiliser warnings
Common causes
Faulty electronic ignition module (EIS)
Weak battery or unstable voltage
Worn or unrecognised key
Wrong coding or pairing between control units
What to do
How to read code P207D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P207D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (7D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P207D mean?
Missing or incorrect CAN message from the ignition/key module (EIS). In the reference definition the engine control unit doesn't receive the CAN message from the electronic ignition module (N73, typical of some Mercedes models), or receives it incorrectly. P207D is manufacturer-defined and I have no reliable information on other brands. The ignition and immobiliser data isn't arriving correctly.
Can I keep driving with code P207D active?
With caution: limp mode possible, have it checked soon
Common causes — P207D
Damaged CAN wiring or corroded connector Faulty electronic ignition module (EIS) Weak battery or unstable voltage Worn or unrecognised key Wrong coding or pairing between control units
How do you fix code P207D?
First check the battery and connectors, then the condition of the ignition module and the CAN network. If the car struggles to start, don't keep cranking it and have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P207C — Intake manifold tuning valve position sensor signa...
- Next code: P207E — Cylinders 4-6 catalytic converter efficiency low,...
Related codes
- P2000 — NOx trap efficiency below threshold, bank 1
- P2001 — NOx trap efficiency below threshold, bank 2
- P2002 — Diesel particulate filter (DPF) clogged
- P2003 — Particulate filter efficiency below threshold, bank 2
- P2004 — Intake manifold runner control stuck open, bank 1
- P2005 — Intake runner control stuck open (bank 2)
- P2006 — Intake runner control stuck closed (bank 1)
- P2007 — Intake runner control stuck closed (bank 2)
- P2008 — Intake runner control circuit open (bank 1)
- P2009 — Intake runner control circuit low (bank 1)
- P200A — P200A: meaning is manufacturer dependent, needs verifying
- P200B — P200B: meaning is manufacturer dependent, needs verifying