Skip to content
Fault code dictionary (DTC)

P20BA — Cylinder 12 fuel injector Y62y12: circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a problem in the electrical circuit of the cylinder 12 injector, labelled Y62y12. It may be an open circuit, a short or an abnormal resistance. The code is manufacturer-defined and the label suggests a 12-cylinder Mercedes-Benz, to be confirmed.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Engine running unevenly from a cylinder not working
Loss of power
Uneven idle
Smell of unburnt fuel

Common causes

Electrically failed injector
Damaged wiring or connector
Corroded contacts in the plug
Fault in the injector driver in the control unit
Rarely, the engine control unit

What to do

Check the connector and wiring of the cylinder 12 injector and have the circuit measured. With the engine running unevenly avoid heavy loads: unburnt fuel can ruin the catalytic converter.

How to read code P20BA

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P20BA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (BA) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P20BA mean?

Cylinder 12 fuel injector Y62y12: circuit fault. The control unit detected a problem in the electrical circuit of the cylinder 12 injector, labelled Y62y12. It may be an open circuit, a short or an abnormal resistance. The code is manufacturer-defined and the label suggests a 12-cylinder Mercedes-Benz, to be confirmed.

Can I keep driving with code P20BA active?

With caution: limp mode possible, have it checked soon

Common causes — P20BA

Electrically failed injector Damaged wiring or connector Corroded contacts in the plug Fault in the injector driver in the control unit Rarely, the engine control unit

How do you fix code P20BA?

Check the connector and wiring of the cylinder 12 injector and have the circuit measured. With the engine running unevenly avoid heavy loads: unburnt fuel can ruin the catalytic converter.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes