P20BB — Cylinder 8 fuel injector Y62y8: circuit fault
| Meaning | The control unit detected a problem in the electrical circuit of the cylinder 8 injector, labelled Y62y8. It may be an open circuit, a short or an out-of-range resistance. The code is manufacturer-defined and the label suggests a 12-cylinder Mercedes-Benz, to be confirmed. |
| Family | Powertrain (P) |
Typical symptoms
Engine running unevenly
Loss of power
Uneven idle
Smell of unburnt fuel
Common causes
Damaged injector wiring or connector
Corrosion in the plug
Fault in the driver circuit in the control unit
Rarely, the engine control unit
What to do
How to read code P20BB
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P20BB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (BB) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P20BB mean?
Cylinder 8 fuel injector Y62y8: circuit fault. The control unit detected a problem in the electrical circuit of the cylinder 8 injector, labelled Y62y8. It may be an open circuit, a short or an out-of-range resistance. The code is manufacturer-defined and the label suggests a 12-cylinder Mercedes-Benz, to be confirmed.
Can I keep driving with code P20BB active?
With caution: limp mode possible, have it checked soon
Common causes — P20BB
Electrically failed injector Damaged injector wiring or connector Corrosion in the plug Fault in the driver circuit in the control unit Rarely, the engine control unit
How do you fix code P20BB?
Check the connector and wiring of the cylinder 8 injector and have the circuit measured. If the engine runs unevenly, reduce loads and have it checked soon to protect the catalytic converter.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P20BA — Cylinder 12 fuel injector Y62y12: circuit fault
- Next code: P20BC — Cylinder 10 fuel injector Y62y10: circuit fault
Related codes
- P2000 — NOx trap efficiency below threshold, bank 1
- P2001 — NOx trap efficiency below threshold, bank 2
- P2002 — Diesel particulate filter (DPF) clogged
- P2003 — Particulate filter efficiency below threshold, bank 2
- P2004 — Intake manifold runner control stuck open, bank 1
- P2005 — Intake runner control stuck open (bank 2)
- P2006 — Intake runner control stuck closed (bank 1)
- P2007 — Intake runner control stuck closed (bank 2)
- P2008 — Intake runner control circuit open (bank 1)
- P2009 — Intake runner control circuit low (bank 1)
- P200A — P200A: meaning is manufacturer dependent, needs verifying
- P200B — P200B: meaning is manufacturer dependent, needs verifying