P20CC — Rough road detection signal (wheel speed comparison)
| Meaning | The reference refers to the rough road detection signal, which the control unit derives by comparing wheel speeds. It is used so that road vibration is not mistaken for engine misfires. I do not have solid information on which threshold or condition stores this code on a particular make. |
| Family | Powertrain (P) |
Typical symptoms
ABS or ESP warning lights on at the same time
Misfire monitoring suspended
Usually no change in how the car drives
Common causes
Dirty, damaged or missing-tooth tone ring
Damaged wiring or connectors at the wheel sensors
Tyres of different sizes or heavily and unevenly worn
Faulty ABS/ESP control unit, rarely
What to do
How to read code P20CC
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P20CC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (CC) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P20CC mean?
Rough road detection signal (wheel speed comparison). The reference refers to the rough road detection signal, which the control unit derives by comparing wheel speeds. It is used so that road vibration is not mistaken for engine misfires. I do not have solid information on which threshold or condition stores this code on a particular make.
Can I keep driving with code P20CC active?
With caution: limp mode possible, have it checked soon
Common causes — P20CC
Faulty wheel speed sensor or one with an irregular signal Dirty, damaged or missing-tooth tone ring Damaged wiring or connectors at the wheel sensors Tyres of different sizes or heavily and unevenly worn Faulty ABS/ESP control unit, rarely
How do you fix code P20CC?
Have the wheel sensors and tone rings checked, together with the tyres and their sizes. It is usually not urgent, but if ABS or ESP lights also come on, have it checked sooner.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P20CB — Left front wheel speed signal missing or faulty (C...
- Next code: P20CD — A/C compressor torque error
Related codes
- P2000 — NOx trap efficiency below threshold, bank 1
- P2001 — NOx trap efficiency below threshold, bank 2
- P2002 — Diesel particulate filter (DPF) clogged
- P2003 — Particulate filter efficiency below threshold, bank 2
- P2004 — Intake manifold runner control stuck open, bank 1
- P2005 — Intake runner control stuck open (bank 2)
- P2006 — Intake runner control stuck closed (bank 1)
- P2007 — Intake runner control stuck closed (bank 2)
- P2008 — Intake runner control circuit open (bank 1)
- P2009 — Intake runner control circuit low (bank 1)
- P200A — P200A: meaning is manufacturer dependent, needs verifying
- P200B — P200B: meaning is manufacturer dependent, needs verifying