P20CD — A/C compressor torque error
| Meaning | The engine control unit takes into account the torque the air conditioning compressor draws from the engine. It detected that the reported or estimated value is not consistent with what is expected. The reference text is very short and I do not have solid information on exactly how a specific make calculates this value. |
| Family | Powertrain (P) |
Typical symptoms
Idle that hunts when the A/C is switched on
Slight loss of engine power with the A/C on
A/C not cooling well or switching off
Common causes
Faulty compressor control valve or regulator
Abnormal pressure in the refrigerant circuit
Damaged compressor wiring or connector
Communication problem between the climate control unit and the engine control unit
What to do
How to read code P20CD
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P20CD starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (CD) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P20CD mean?
A/C compressor torque error. The engine control unit takes into account the torque the air conditioning compressor draws from the engine. It detected that the reported or estimated value is not consistent with what is expected. The reference text is very short and I do not have solid information on exactly how a specific make calculates this value.
Can I keep driving with code P20CD active?
With caution: limp mode possible, have it checked soon
Common causes — P20CD
A/C compressor with excessive friction or close to seizing Faulty compressor control valve or regulator Abnormal pressure in the refrigerant circuit Damaged compressor wiring or connector Communication problem between the climate control unit and the engine control unit
How do you fix code P20CD?
Check whether the fault only appears with the A/C on and have it examined by someone who can read the circuit data. If the compressor makes loud noises, avoid using the A/C until it is checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P20CC — Rough road detection signal (wheel speed compariso...
- Next code: P20CE — A/C refrigerant pressure too high
Related codes
- P2000 — NOx trap efficiency below threshold, bank 1
- P2001 — NOx trap efficiency below threshold, bank 2
- P2002 — Diesel particulate filter (DPF) clogged
- P2003 — Particulate filter efficiency below threshold, bank 2
- P2004 — Intake manifold runner control stuck open, bank 1
- P2005 — Intake runner control stuck open (bank 2)
- P2006 — Intake runner control stuck closed (bank 1)
- P2007 — Intake runner control stuck closed (bank 2)
- P2008 — Intake runner control circuit open (bank 1)
- P2009 — Intake runner control circuit low (bank 1)
- P200A — P200A: meaning is manufacturer dependent, needs verifying
- P200B — P200B: meaning is manufacturer dependent, needs verifying