Skip to content
Fault code dictionary (DTC)

P20DA — CAN error on the torque request from the ESP control unit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine control unit is not receiving the ESP control unit torque request message correctly over CAN. The reference indicates Mercedes-Benz; for other makes I have no solid information. The problem is in the communication rather than in the engine.
FamilyPowertrain (P)

Typical symptoms

ESP warning light on
Engine warning light on
Traction control unavailable
Several warning lights on together
Engine response occasionally reduced

Common causes

Disturbance or break on the CAN line
Corroded connectors or damaged wiring
Weak battery or unstable voltage
ESP control unit not responding
Another module disturbing the network

What to do

Check the battery, terminals and grounds, then read the codes of all modules. Drive carefully and do not delay the check for long.

How to read code P20DA

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P20DA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (DA) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P20DA mean?

CAN error on the torque request from the ESP control unit. The engine control unit is not receiving the ESP control unit torque request message correctly over CAN. The reference indicates Mercedes-Benz; for other makes I have no solid information. The problem is in the communication rather than in the engine.

Can I keep driving with code P20DA active?

With caution: limp mode possible, have it checked soon

Common causes — P20DA

Disturbance or break on the CAN line Corroded connectors or damaged wiring Weak battery or unstable voltage ESP control unit not responding Another module disturbing the network

How do you fix code P20DA?

Check the battery, terminals and grounds, then read the codes of all modules. Drive carefully and do not delay the check for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes