P2190 — System too rich at idle, bank 2
| Meaning | The control unit has found that the air-fuel mixture on bank 2, the side of the engine that doesn't include cylinder 1, is too rich at idle: there is more fuel than the available air needs. The control unit has already tried to compensate by cutting fuel and it wasn't enough. |
| Family | Powertrain (P) |
Typical symptoms
Smell of unburnt fuel from the exhaust
Rough or too-high idle
Rising fuel consumption
Black smoke or dark exhaust
Spark plugs fouled with black deposits
Common causes
Canister purge valve stuck open
Fuel pressure too high
Heavily clogged air filter
Temperature sensor or air flow meter giving wrong readings
Faulty bank 2 oxygen sensor
What to do
How to read code P2190
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2190 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (90) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2190 mean?
System too rich at idle, bank 2. The control unit has found that the air-fuel mixture on bank 2, the side of the engine that doesn't include cylinder 1, is too rich at idle: there is more fuel than the available air needs. The control unit has already tried to compensate by cutting fuel and it wasn't enough.
Can I keep driving with code P2190 active?
Yes, no known limitation
Common causes — P2190
Leaking or stuck-open injector Canister purge valve stuck open Fuel pressure too high Heavily clogged air filter Temperature sensor or air flow meter giving wrong readings Faulty bank 2 oxygen sensor
How do you fix code P2190?
Have the air filter, purge valve and the fuel correction values from the scan tool checked first. A prolonged rich mixture can damage the catalytic converter, so don't put it off for long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P218F — Reductant no flow detected (AdBlue)
- Next code: P2191 — System too lean at higher load, bank 1
Related codes
- P2100 — Throttle actuator motor circuit open
- P2101 — Throttle actuator motor circuit range/performance
- P2102 — Throttle actuator motor circuit low
- P2103 — Throttle actuator motor circuit high
- P2104 — Throttle actuator control system forced idle
- P2105 — Throttle actuator control system forced engine shutdown
- P2106 — Throttle actuator control system forced limited power
- P2107 — Throttle actuator control module processor fault
- P2108 — Throttle actuator control module performance
- P2109 — Throttle/pedal sensor A minimum stop performance
- P210A — Starter lockout relay K38/3: short circuit or open wiring
- P210B — Throttle actuator B control motor circuit range/performance