Skip to content
Fault code dictionary (DTC)

P2192 — System too rich at higher load, bank 1

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has found that the mixture on bank 1, the side that includes cylinder 1, is too rich when the engine is under load: more fuel than the incoming air calls for. The automatic correction couldn't bring it back into range.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Rising fuel consumption
Smell of fuel from the exhaust
Dark smoke when accelerating
Uneven power or a sluggish engine
Fouled spark plugs

Common causes

Leaking or stuck-open injector
Fuel pressure too high (faulty regulator)
Clogged air filter
Air flow meter reading more air than real
Faulty canister purge valve
Faulty bank 1 oxygen sensor

What to do

Check the air filter and air flow meter reading, then the fuel pressure and injectors. Excess fuel can damage the catalytic converter and dilute the engine oil, so it's best not to wait.

How to read code P2192

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2192 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (92) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2192 mean?

System too rich at higher load, bank 1. The control unit has found that the mixture on bank 1, the side that includes cylinder 1, is too rich when the engine is under load: more fuel than the incoming air calls for. The automatic correction couldn't bring it back into range.

Can I keep driving with code P2192 active?

With caution: limp mode possible, have it checked soon

Common causes — P2192

Leaking or stuck-open injector Fuel pressure too high (faulty regulator) Clogged air filter Air flow meter reading more air than real Faulty canister purge valve Faulty bank 1 oxygen sensor

How do you fix code P2192?

Check the air filter and air flow meter reading, then the fuel pressure and injectors. Excess fuel can damage the catalytic converter and dilute the engine oil, so it's best not to wait.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes