P222B — Barometric pressure sensor B reading implausible
| Meaning | The control unit found that the value of the second barometric pressure sensor, labelled "B", does not match what is expected, for example compared with the other sensor or with manifold pressure. The electrical circuit may be fine, but the reading looks wrong. Exactly which sensor is B depends on the manufacturer, and I can't say without knowing the make. |
| Family | Powertrain (P) |
Typical symptoms
Loss of performance, especially uphill or at altitude
Fuel consumption or smoke out of the ordinary
Turbo acting irregularly
Slightly unstable idle
Common causes
Blocked air port or small hose of the sensor
Air leaks in the intake system
Connector with weak contact
Another pressure sensor giving a different value
Faulty engine control unit
What to do
How to read code P222B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P222B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (2B) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P222B mean?
Barometric pressure sensor B reading implausible. The control unit found that the value of the second barometric pressure sensor, labelled "B", does not match what is expected, for example compared with the other sensor or with manifold pressure. The electrical circuit may be fine, but the reading looks wrong. Exactly which sensor is B depends on the manufacturer, and I can't say without knowing the make.
Can I keep driving with code P222B active?
With caution: limp mode possible, have it checked soon
Common causes — P222B
Barometric sensor B reading inaccurately Blocked air port or small hose of the sensor Air leaks in the intake system Connector with weak contact Another pressure sensor giving a different value Faulty engine control unit
How do you fix code P222B?
Check that the connector and any small hose of the sensor are clear and intact, and that there are no air leaks in the intake. To tell which sensor is wrong, the values read with the diagnostic tool need to be compared with the engine off. It is not urgent, but it is best to act soon to avoid performance problems.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P222A — Barometric pressure sensor B circuit fault
- Next code: P222C — Barometric pressure sensor B: signal too low
Related codes
- P2200 — NOx sensor circuit fault, bank 1
- P2201 — NOx sensor circuit range/performance, bank 1
- P2202 — NOx sensor circuit low input, bank 1
- P2203 — NOx sensor circuit high input, bank 1
- P2204 — NOx sensor intermittent signal, bank 1
- P2205 — NOx sensor heater control circuit open, bank 1
- P2206 — NOx sensor heater control circuit low, bank 1
- P2207 — NOx sensor heater control circuit high, bank 1
- P2208 — NOx sensor heater sense circuit, bank 1
- P2209 — NOx sensor heater sense circuit out of range, bank 1
- P220A — Speed signal comparison implausible, Y3/6n2 and Y3/6n3
- P220B — Speed too high, Y3/6n2 or Y3/6n3