Skip to content
Fault code dictionary (DTC)

P22C2 — Bank 2 Sensor 2 O2 sensor pumping current trim circuit/open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer finds no continuity in the pumping current trim circuit of the downstream wide-band oxygen sensor on bank 2. This circuit is used to calibrate the sensor's reading. If it is broken, the reading may be inaccurate.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Usually normal driving
Downstream sensor less reliable
Possible failure at an emissions inspection

Common causes

Unplugged or corroded connector
Broken wire in the harness
Failed sensor
Wiring damaged near the exhaust
Faulty engine computer, uncommon

What to do

Check the connector and wires of the bank 2 sensor behind the catalytic converter for broken wires or corroded terminals. You can use the car, but have the circuit checked as soon as possible.

How to read code P22C2

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P22C2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (C2) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P22C2 mean?

Bank 2 Sensor 2 O2 sensor pumping current trim circuit/open. The engine computer finds no continuity in the pumping current trim circuit of the downstream wide-band oxygen sensor on bank 2. This circuit is used to calibrate the sensor's reading. If it is broken, the reading may be inaccurate.

Can I keep driving with code P22C2 active?

With caution: limp mode possible, have it checked soon

Common causes — P22C2

Unplugged or corroded connector Broken wire in the harness Failed sensor Wiring damaged near the exhaust Faulty engine computer, uncommon

How do you fix code P22C2?

Check the connector and wires of the bank 2 sensor behind the catalytic converter for broken wires or corroded terminals. You can use the car, but have the circuit checked as soon as possible.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes