Skip to content
Fault code dictionary (DTC)

P22C5 — Turbo compressor outlet valve control circuit/open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer finds no continuity in the control circuit of the valve at the turbocharger compressor outlet. The circuit appears broken, so the valve may not receive commands. How exactly this valve works depends on the manufacturer and engine.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Possible loss of power or slow turbo response
Possible hissing or noises when lifting off the throttle
Reduced-power mode in some cases

Common causes

Unplugged or corroded valve connector
Broken wire in the harness
Failed solenoid valve
Wiring damaged by heat
Faulty engine computer, uncommon

What to do

First check the connector and wires of the valve, found on the turbo or its outlet duct. If the car loses power, drive carefully and have it checked soon to avoid stressing the turbo.

How to read code P22C5

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P22C5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (C5) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P22C5 mean?

Turbo compressor outlet valve control circuit/open. The engine computer finds no continuity in the control circuit of the valve at the turbocharger compressor outlet. The circuit appears broken, so the valve may not receive commands. How exactly this valve works depends on the manufacturer and engine.

Can I keep driving with code P22C5 active?

With caution: limp mode possible, have it checked soon

Common causes — P22C5

Unplugged or corroded valve connector Broken wire in the harness Failed solenoid valve Wiring damaged by heat Faulty engine computer, uncommon

How do you fix code P22C5?

First check the connector and wires of the valve, found on the turbo or its outlet duct. If the car loses power, drive carefully and have it checked soon to avoid stressing the turbo.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes