Skip to content
Fault code dictionary (DTC)

P22E4 — Cylinder 3 alternative fuel injector: performance out of range

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit sees that the control circuit of the cylinder 3 alternative fuel injector (for example the gas injector on a bi-fuel system) is not behaving as expected. The signal is there, but the values are out of tolerance. The exact meaning depends on the manufacturer, but it points to an injector or circuit that works poorly without being completely open.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Rough running, especially on gas or the alternative fuel
Loss of power
Unstable idle
Frequent switching to the normal fuel

Common causes

Connector with weak or corroded contact
Sluggish, dirty injector or abnormal internal resistance
Wiring with abnormal resistance from damaged strands
Low supply voltage from a weak battery or poor ground
Faulty alternative fuel or engine control unit (rare)

What to do

First check the battery condition, the grounds and the connector of the cylinder 3 injector. Then the injector resistance and operation should be tested. You can drive on the normal fuel, but the check should be done within a reasonable time.

How to read code P22E4

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P22E4 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (2) points to fuel and air metering (injector circuit), and the last two (E4) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P22E4 mean?

Cylinder 3 alternative fuel injector: performance out of range. The control unit sees that the control circuit of the cylinder 3 alternative fuel injector (for example the gas injector on a bi-fuel system) is not behaving as expected. The signal is there, but the values are out of tolerance. The exact meaning depends on the manufacturer, but it points to an injector or circuit that works poorly without being completely open.

Can I keep driving with code P22E4 active?

With caution: limp mode possible, have it checked soon

Common causes — P22E4

Connector with weak or corroded contact Sluggish, dirty injector or abnormal internal resistance Wiring with abnormal resistance from damaged strands Low supply voltage from a weak battery or poor ground Faulty alternative fuel or engine control unit (rare)

How do you fix code P22E4?

First check the battery condition, the grounds and the connector of the cylinder 3 injector. Then the injector resistance and operation should be tested. You can drive on the normal fuel, but the check should be done within a reasonable time.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes