P2351 — Cylinder 9 combustion performance fault
| Meaning | From the pressure pattern, the computer judges that combustion in cylinder 9 is not happening as expected. It may be weak, incomplete or badly timed combustion. The exact criterion depends on the manufacturer and I cannot be more precise without knowing the make. |
| Family | Powertrain (P) |
Typical symptoms
Loss of power
Irregular running, especially at idle
Fuel consumption higher than normal
Smell of unburnt fuel from the exhaust
Slower starting
Common causes
Dirty or poorly delivering injector on cylinder 9
Loss of compression from mechanical wear
Mixture too rich or too lean
Faulty cylinder 9 pressure sensor
Timing or valve problem
What to do
How to read code P2351
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2351 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (51) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2351 mean?
Cylinder 9 combustion performance fault. From the pressure pattern, the computer judges that combustion in cylinder 9 is not happening as expected. It may be weak, incomplete or badly timed combustion. The exact criterion depends on the manufacturer and I cannot be more precise without knowing the make.
Can I keep driving with code P2351 active?
With caution: limp mode possible, have it checked soon
Common causes — P2351
Worn spark plug or coil on cylinder 9 Dirty or poorly delivering injector on cylinder 9 Loss of compression from mechanical wear Mixture too rich or too lean Faulty cylinder 9 pressure sensor Timing or valve problem
How do you fix code P2351?
First check the spark plug, coil and injector of cylinder 9, then ask for a compression test if the problem remains. Do not keep driving under load if you notice power loss or jerking, to avoid damaging the catalytic converter.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2350 — Cylinder 9 pressure variation too high
- Next code: P2352 — Cylinder 10 pressure sensor circuit fault
Related codes
- P2300 — Ignition coil A primary control circuit low
- P2301 — Ignition coil A primary control circuit high
- P2302 — Ignition coil A secondary circuit
- P2303 — Ignition coil B primary control circuit low
- P2304 — Ignition coil B primary control circuit high
- P2305 — Ignition coil B secondary circuit
- P2306 — Ignition coil C primary control circuit low
- P2307 — Ignition coil C primary control circuit high
- P2308 — Ignition coil C secondary circuit
- P2309 — Ignition coil D primary control circuit low
- P230A — Cylinder 1 air-fuel imbalance, adjustment at limit
- P230B — Cylinder 2 air-fuel imbalance, adjustment at limit