P2371 — Fuel volume regulator B: control performance
| Meaning | The control unit commands fuel volume regulator B, but the response does not match what was requested. The electrical circuit is not necessarily broken: the fault can be in the regulator itself or in the resulting fuel pressure. |
| Family | Powertrain (P) |
Typical symptoms
Unstable fuel pressure
Loss of power
Slow starting
Engine jerking under acceleration
Common causes
Contaminated fuel or clogged filter
Worn high-pressure pump
Connector with weak contact
Irregular supply voltage
What to do
How to read code P2371
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2371 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (71) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2371 mean?
Fuel volume regulator B: control performance. The control unit commands fuel volume regulator B, but the response does not match what was requested. The electrical circuit is not necessarily broken: the fault can be in the regulator itself or in the resulting fuel pressure.
Can I keep driving with code P2371 active?
With caution: limp mode possible, have it checked soon
Common causes — P2371
Dirty or stuck regulator Contaminated fuel or clogged filter Worn high-pressure pump Connector with weak contact Irregular supply voltage
How do you fix code P2371?
Check the fuel filter, fuel quality and regulator connector. If pressure is unstable, avoid demanding driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2370 — Fuel volume regulator B: open control circuit
- Next code: P2372 — Fuel volume regulator B: control circuit low
Related codes
- P2300 — Ignition coil A primary control circuit low
- P2301 — Ignition coil A primary control circuit high
- P2302 — Ignition coil A secondary circuit
- P2303 — Ignition coil B primary control circuit low
- P2304 — Ignition coil B primary control circuit high
- P2305 — Ignition coil B secondary circuit
- P2306 — Ignition coil C primary control circuit low
- P2307 — Ignition coil C primary control circuit high
- P2308 — Ignition coil C secondary circuit
- P2309 — Ignition coil D primary control circuit low
- P230A — Cylinder 1 air-fuel imbalance, adjustment at limit
- P230B — Cylinder 2 air-fuel imbalance, adjustment at limit