P2391 — Diesel intake air flow B control: performance problem
| Meaning | The control unit commands the second intake air regulating device on diesel engines ("B"), but its response isn't what is expected. The electrical circuit may be fine: the problem is that the actuator moves badly, too slowly, or doesn't reach the requested position. Which component it is depends on the manufacturer, and for some brands I have no reliable information. |
| Family | Powertrain (P) |
Typical symptoms
Loss of power or sluggish response
Black or abnormal exhaust smoke
Unstable idle
Fuel consumption different from usual
Limp mode on some cars
Common causes
Worn or weak actuator
Seized linkage or pivots
Air leaks or blocked air passages
Faulty position sensor
Wiring or connector with abnormal resistance
What to do
How to read code P2391
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P2391 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (91) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P2391 mean?
Diesel intake air flow B control: performance problem. The control unit commands the second intake air regulating device on diesel engines ("B"), but its response isn't what is expected. The electrical circuit may be fine: the problem is that the actuator moves badly, too slowly, or doesn't reach the requested position. Which component it is depends on the manufacturer, and for some brands I have no reliable information.
Can I keep driving with code P2391 active?
With caution: limp mode possible, have it checked soon
Common causes — P2391
Valve or flap clogged with soot and stiff to move Worn or weak actuator Seized linkage or pivots Air leaks or blocked air passages Faulty position sensor Wiring or connector with abnormal resistance
How do you fix code P2391?
Have a scan tool check whether the requested and measured positions match, and inspect the valve for soot or stiffness. Act fairly soon: deposits tend to get worse and can cause other problems.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P2390 — Diesel intake air flow B control: open circuit
- Next code: P2392 — Diesel intake air flow B control: circuit low
Related codes
- P2300 — Ignition coil A primary control circuit low
- P2301 — Ignition coil A primary control circuit high
- P2302 — Ignition coil A secondary circuit
- P2303 — Ignition coil B primary control circuit low
- P2304 — Ignition coil B primary control circuit high
- P2305 — Ignition coil B secondary circuit
- P2306 — Ignition coil C primary control circuit low
- P2307 — Ignition coil C primary control circuit high
- P2308 — Ignition coil C secondary circuit
- P2309 — Ignition coil D primary control circuit low
- P230A — Cylinder 1 air-fuel imbalance, adjustment at limit
- P230B — Cylinder 2 air-fuel imbalance, adjustment at limit