P23B5 — NOx sensor bank 1 sensor 3: heater sense range/performance
| Meaning | The control module is getting an implausible value from the NOx sensor heater monitoring circuit. The circuit is not necessarily broken, but the reading does not match what is expected. It could be the heater working poorly or the sensor reporting wrong values. Where sensor 3 sits varies by manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Warning from the AdBlue or exhaust system, if fitted
Possible power limitation
Higher emissions
Failed emissions inspection
Common causes
Aged NOx sensor
Connector or wiring with abnormal resistance
Unstable sensor supply
Sensor control unit failure, which is rare
What to do
How to read code P23B5
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P23B5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (B5) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P23B5 mean?
NOx sensor bank 1 sensor 3: heater sense range/performance. The control module is getting an implausible value from the NOx sensor heater monitoring circuit. The circuit is not necessarily broken, but the reading does not match what is expected. It could be the heater working poorly or the sensor reporting wrong values. Where sensor 3 sits varies by manufacturer.
Can I keep driving with code P23B5 active?
With caution: limp mode possible, have it checked soon
Common causes — P23B5
Degraded sensor heater Aged NOx sensor Connector or wiring with abnormal resistance Unstable sensor supply Sensor control unit failure, which is rare
How do you fix code P23B5?
First have the supply voltage, connector and wiring checked. Then the heater data needs to be read. Don't ignore the code, because the sensor may be close to failing.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P23B4 — NOx sensor bank 1 sensor 3: heater sense circuit f...
- Next code: P23B6 — NOx sensor bank 1 sensor 3: supply voltage circuit...
Related codes
- P2300 — Ignition coil A primary control circuit low
- P2301 — Ignition coil A primary control circuit high
- P2302 — Ignition coil A secondary circuit
- P2303 — Ignition coil B primary control circuit low
- P2304 — Ignition coil B primary control circuit high
- P2305 — Ignition coil B secondary circuit
- P2306 — Ignition coil C primary control circuit low
- P2307 — Ignition coil C primary control circuit high
- P2308 — Ignition coil C secondary circuit
- P2309 — Ignition coil D primary control circuit low
- P230A — Cylinder 1 air-fuel imbalance, adjustment at limit
- P230B — Cylinder 2 air-fuel imbalance, adjustment at limit