P23C6 — Coolant bypass valve C: control circuit current or temperature too high
| Meaning | The control unit detected that the circuit driving coolant bypass valve C draws too much current or overheats. To protect itself it may stop commanding the valve. Which valve is C depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Irregular engine temperature
Poor cabin heating
Valve not moving or moving poorly
Cooling fan very active
Common causes
Failed valve coil or motor
Valve mechanically stuck
Damaged connector
Fault in the control unit driver circuit
What to do
How to read code P23C6
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P23C6 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (C6) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P23C6 mean?
Coolant bypass valve C: control circuit current or temperature too high. The control unit detected that the circuit driving coolant bypass valve C draws too much current or overheats. To protect itself it may stop commanding the valve. Which valve is C depends on the manufacturer.
Can I keep driving with code P23C6 active?
With caution: limp mode possible, have it checked soon
Common causes — P23C6
Short circuit in the valve wiring Failed valve coil or motor Valve mechanically stuck Damaged connector Fault in the control unit driver circuit
How do you fix code P23C6?
Have the wiring, connector and electrical resistance of the valve checked. Watch the engine temperature and do not keep driving if it climbs too high.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P23C5 — Coolant bypass valve C: position sensor signal too...
- Next code: P23C7 — Fuel heater control module: power control circuit...
Related codes
- P2300 — Ignition coil A primary control circuit low
- P2301 — Ignition coil A primary control circuit high
- P2302 — Ignition coil A secondary circuit
- P2303 — Ignition coil B primary control circuit low
- P2304 — Ignition coil B primary control circuit high
- P2305 — Ignition coil B secondary circuit
- P2306 — Ignition coil C primary control circuit low
- P2307 — Ignition coil C primary control circuit high
- P2308 — Ignition coil C secondary circuit
- P2309 — Ignition coil D primary control circuit low
- P230A — Cylinder 1 air-fuel imbalance, adjustment at limit
- P230B — Cylinder 2 air-fuel imbalance, adjustment at limit