Skip to content
Fault code dictionary (DTC)

P2472 — Exhaust temperature sensor erratic, bank 1 sensor 4

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe signal from sensor 4 on bank 1 comes and goes or jumps irregularly. This is typical of an electrical contact that breaks now and then, for example from vibration or heat. The control unit cannot use the reading continuously to manage the particulate filter.
FamilyPowertrain (P)

Typical symptoms

Check engine light that comes on and sometimes goes off
Irregular filter regeneration
Intermittent loss of power
Variable diesel consumption

Common causes

Loose connector or corroded contacts
Sensor wire broken internally by vibration
Wiring rubbing against engine or exhaust parts
Faulty temperature sensor
Rarely, a faulty engine control unit

What to do

Check that the connector is fully seated and, with a cold engine, gently move the wiring to see whether the fault appears. Intermittent faults are the hardest to find, so a test in a workshop with the engine running may be needed. It isn't an emergency, but don't leave it for long.

How to read code P2472

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P2472 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (72) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P2472 mean?

Exhaust temperature sensor erratic, bank 1 sensor 4. The signal from sensor 4 on bank 1 comes and goes or jumps irregularly. This is typical of an electrical contact that breaks now and then, for example from vibration or heat. The control unit cannot use the reading continuously to manage the particulate filter.

Can I keep driving with code P2472 active?

With caution: limp mode possible, have it checked soon

Common causes — P2472

Loose connector or corroded contacts Sensor wire broken internally by vibration Wiring rubbing against engine or exhaust parts Faulty temperature sensor Rarely, a faulty engine control unit

How do you fix code P2472?

Check that the connector is fully seated and, with a cold engine, gently move the wiring to see whether the fault appears. Intermittent faults are the hardest to find, so a test in a workshop with the engine running may be needed. It isn't an emergency, but don't leave it for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes